Effect of synthesis method and buffer composition on the LCST of a smart copolymer of N‐isopropylacrylamide and acrylic acid

Responsive polymers have been the focus of many studies during the past decade because of their ability to change according to environmental stimuli. In this paper, we report on the development of a method to synthesize a pH/temperature‐sensitive linear copolymer, poly(N‐isopropylacrylamide‐ co‐acrylic acid)(poly(NIPAAm‐co‐AAc)), with a molecular weight of about 10⁶–10⁵ Da in water using azobisisobutyronitrile (AIBN) as the initiator. The effects of the following on the lower critical solution temperature (LCST) of the copolymer and homopolymer of NIPAAm were investigated: the type of buffer salts and pH changes of test solutions, molecular weight and concentration of homopolymer/copolymer solutions, and AAc monomer molar feed ratio (mol%). The effects of different synthesis methods on the molecular weight and on the AAc content were also evaluated. The mechanism of action in environments with different pH values is discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Diamond paste-based electrodes for determination of Cr(III) in pharmaceutical compounds

A new class of monocrystalline diamond paste-based electrodes is proposed for the determination of chromium(III) at trace levels in vitamins. Three types of monocrystalline diamond—natural diamond 1 (natural diamond), synthetic diamond 50 (synthetic-1), and synthetic diamond 1 (synthetic-2)—were used for electrode construction. The linear concentration ranges are between 10^–10 and 10^–8; 10^–9 and 10^–7, and 10^–10 to 10^–8 mol L^–1, with limits of detection of 10^–12, 10^–12, and 10^–11 mol L^–1, when natural diamond, synthetic-1, and synthetic-2, respectively, are used as electrode materials. For electrodes based on natural diamond and synthetic-1 it was found that Cr(III) yields a peak at about +0.275±0.015 V (vs. Ag/AgCl) within a predetermined positive potential range situated between +0.4 and +0.2 V, while for the electrode based on synthetic-2 the peaks are found at +0.300±0.015 V (vs. Ag/AgCl). The proposed method is reliable for the determination of chromium(III) at trace levels in two vitamin tablets (RSD<0.2%).     

Characteristics of Subtractive Anodic Stripping Voltammetry of Lead,Cadmium and Thallium at Silver‐Gold Alloy Electrodes

Silver‐gold alloy electrodes have been studied for the purpose of the quantitative determination of heavy metals by subtractive anodic stripping voltammetry, (SASV). The results have been compared with those obtained with the silver and gold electrodes. The 50/50 a/o Ag/Au alloy electrode is the most suitable for quantifying thallium in the presence of lead and cadmium. The separation of its peak from those of lead and cadmium is 200 mV, which is about twice the separation obtained on the pure metal electrodes and is also better than on mercury. The silver electrode is suitable for the simultaneous determination of thallium, lead and cadmium. The peaks of lead and cadmium overlap on the 50/50 alloy. Pure silver or pure gold can be used for simultaneous quantification of these two metals. The use of gold for quantifying lead and cadmium is more limited because the peak potential of cadmium is shifted in the negative direction as its concentration increases and at [Cd²⁺]>200 nM, the two peaks merge. SASV enables correction for background currents and is of utmost importance for obtaining well‐defined peaks. The peaks of lead, cadmium and thallium appear over a relatively narrow potential range (ca. 200 mV) on all the electrodes presented in this work. For this reason, the quantifying of a peak is based on the derivative at the inflection point of only one of its branches (ascending or descending). All SASV measurements were carried out without removal of oxygen.     

Permselectivities and ion-exchange properties of organically modified sol—gel electrodes

Sol—gel films prepared from organosilanes containing acidic/basic sites have been investigated as permselective and ion-exchange coatings for electroanalytical and bioanalytical investigations. When a glassy carbon electrode was modified with a sol—gel film fabricated from 3-aminopropyl-methyl-diethoxysilane (silane—NH₂), excellent permselectivity and anion-exchange properties were obtained. For a pH 7.4, 1 mM potassium ferricyanide solution, an eight-fold increase in current was observed after the electrode was immersed in solution for 10min whereas complete suppression of the electrochemical response for ruthenium hexaamine and methyl viologen was observed. Sol—gel films fabricated from trimethoxysilylpropyl ethylenediamine triacetic acid (silane—(COOH)₃) exhibited nearly complementary behavior. An approximately 10-fold increase in current was observed for pH 7.4, 1 mM ruthenium hexaammine solutions and complete suppression of the potassium ferricyanide response was observed. These ion-exchange properties can be attributed to the strong electrostatic interactions between the acid/basic functional group in the matrix and the highly charged analyte molecules. When glassy carbon electrodes were modified with diethyl-(triethoxysilypropyl) malonate (silane—(COOEt)₂), the films did not exhibit distinct ion-exchange properties but rather suppressed the reduction of potassium ferricyanide. The observed permselectivity results from the electron dense carbonyl group and/or hydrolyzed ester functionalities in the film.     

Free energies of transfer of alkali halides from water to urea-water mixtures at 25°C from EMF measurements

The standard potentials_s E ^o of M/M⁺ (M=Li, Na, K, Rb, and Cs) electrodes in aqueous urea solutions containing 12, 20, 30 and 37% by weight of urea have been determined at 25°C from emf measurements on the cell M(Hg)/MCl (m), solvent/AgCl–Ag, from the activities of metals in amalgams by use of a similar type of cell in water, and from the values of_s E ^o of the Ag/AgCl electrode determined earlier. The standard free energies of transfer of MCl, G _t ^o (MCl), from water to the mixed solvents, computed by use of these values and those for the Ag–AgCl electrode, rise sharply from Li⁺ to Na⁺ but fall from Na⁺ to K⁺ and rather sharply from K⁺ to Cs⁺ with a maximum at Na⁺ in all the solvent compositions. This has been attributed to the superimposition of soft-soft interactions on the electrostatic interactions between the ions and the negative charge centers of the possible hydrogen-bonded solvent complexes in the mixed solvents. Comparison of G _t ^o (i) values for individual ions, obtained by a simultaneous extrapolation procedure, with those in aqueous mixtures of methanol,t-butanol, and dimethyl sulfoxide leads to the conclusion that the solvation of these ions in all these solvents is chiefly dictated by the acid-base type of ion-solvent interactions.     

The Electrochemistry of Tetraphenyl Porphyrin Iron(III) Within Immobilized Droplets Supported on Platinum Electrodes

For the first time, the voltammetry of an ensemble of immobilized benzonitrile microdroplets containing 5,10,15,20‐tetraphenyl‐21H,23H‐porphine iron (III) chloride, TPPFeCl immobilized at platinum electrodes immersed in various aqueous electrolytes has been explored. The reduction of TPPFeCl was observed with the voltammetric response seen to be highly dependent on the nature of ions in the surrounding aqueous phase. Unlike voltammetry in purely homogeneous solution the nature of the aqueous electrolyte can influence the voltammetry in the droplet phase. The electrochemical reduction of TPPFeCl contained within tetrabutylammonium chloride (TBACl) supported benzonitrile (PhCN) microdroplets immersed into an aqueous solution of TBACl was first studied. During TPPFeCl reduction the resulting [TPPFeCl]^? species is stabilized due to the excess of chloride anions inside the oil droplet. Voltammograms of homogeneous solutions of PhCN supported with TBACl show similar chemically reversible process which is also attributed to the stable [TPPFeCl]^? species. This anion stabilization was not observed when the oil droplets were supported with tetrabutylammonium perchlorate (TBAP) or when the PhCN solution bathing the microdroplet ensemble was supported with TBAP resulting in a chemically irreversible process. The voltammetry of unsupported droplets immobilized on a platinum electrode immersed in different aqueous electrolytes was also explored and the fate of the [TPPFeCl]^? species formed considered during the reduction sweep. Similarities and difference to voltammetry in purely homogeneous media are noted and the use of droplet voltammetry provides complimentary information.     

Diffusion layer titration of dipyrone in pharmaceuticals at a dual-band electrochemical cell

This paper describes the use of a thin-layered dual-band electrochemical cell operating at flow conditions to determine dipyrone (sodium salt of 1-phenil-2,3-dimethyl-4-methylaminomethanesulfonate-5-pyrazolone) by reaction with electrogenerated iodine. The electrolytic cell consisted of two closely spaced gold electrodes, the upper stream electrode serving as the generator electrode and the downstream electrode working as the collector electrode. A linear dynamic range from 2 to 15 μmol l⁻¹ dipyrone was obtained by using a sample volume of 100 μl, with a detection limit of 1.1 μmol l⁻¹. Standard deviation (S.D.) of 3.4% for 20 repetitive injections of a 40 μmol l⁻¹ dipyrone solution and sampling frequency of 90 h⁻¹ were achieved. The results obtained with the thin-layered dual-band electrochemical cell for dipyrone determination in three different pharmaceutical samples compared well with those found by iodimetry with coulometrically generated iodine.     

Electrode Modified with Langmuir–Blodgett (LB) Film of Calixarenes for Preconcentration and Stripping Analysis of Hg(II)

A new type of current sensor, Langmuir–Blodgett (LB) film of calixarene on the surface of glassy carbon electrode (GCE) was prepared for determination of mercury by anodic stripping voltammetry (ASV). An anodic stripping peak was obtained at 0.15 V (vs. SCE) by scanning the potential from ?0.6 to +0.6 V. Compared with a bare GCE, the LB film coated electrode greatly improves the sensitivity of measuring mercury ion. The fabricated electrode in a 0.1 M H₂SO₄+0.01 M HCl solution shows a linear voltammetric response in the range of 0.07–40 μg L^?1 and detection limit of 0.04 μg L^?1 (ca. 2×10^?10 M). The high sensitivity, selectivity, and stability of this LB film modified electrode demonstrates its practical application for a simple, rapid and economical determination of Hg²⁺ in a water sample.     

A Self‐Sampling‐and‐Flow Biosensor for Continuous Monitoring

A self‐sampling‐and‐flow biosensor was fabricated by sandwiching a nitrocellulose strip on the working electrode side of the double‐sided microporous gold electrodes and a wicking pad on the counter electrode side. The double‐sided microporous electrodes were formed by plasma sputtering of gold on a porous nylon substrate. Sample was taken up to the enzyme‐immobilized working electrode by the capillary action of the front nitrocellulose strip dipped into the sample solution, analyzed electrochemically at the enzyme‐immobilized electrode, and diffuses out to the backside wicking pad through the micropores of the electrodes, constituting a complete flow cell device with no mechanical liquid‐transporting device. Biosensor was formed by co‐immobilizing the glucose oxidase and electron transfer mediator (ferrocene acetic acid) on the thioctic acid self‐assembled monolayer‐modified working electrode. A typical response time of the biosensor was about 5 min with the sensitivity of 2.98 nA/mM glucose, providing linear response up to 22.5 mM. To demonstrate the use of self‐sampling‐and‐flow biosensor, the consumption rate of glucose in the presence of yeast was monitored for five days.     

Kinetic-potentiometric assay of formaldehyde in pharmaceutical and industrial samples, monitored by copper solid ion selective electrode, after its reaction with the copper(II)-bis-(ethylenediamine) complex

A kinetic-potentiometric method is described for the quantitative assay of formaldehyde (HCHO) in pharmaceutical and industrial preparations. It is based on the reaction of HCHO with (ethylenediamine)-Cu(II)-sulfate [Cu(CH₂NH₂)₂(H₂O)₂] · SO₄. The changes in potential, resulting from the release of the Cu(II) cations, are monitored with a Cu(II)-ion selective electrode. The calibration curve for the HCHO is linear in the concentration range 50–250 mg L⁻¹, with a limit of detection of 8.5 mg L⁻¹. The method shows very good reproducibility with an RSD of 2.6% for successive injections (n = 5) of 150 mg L⁻¹ HCHO primary solution, while it is interference free. The method was successfully tested in various industrial and pharmaceutical preparations.